Free shipping on all orders over $50
7-15 days international
29 people viewing this product right now!
30-day free returns
Secure checkout
22908026
Brighten up your day, and your workspace, with the clean, contemporary look of this office computer desk. The beautiful detailing and smart design give you a compact workstation that will fit in small areas like living rooms, bedrooms and temporary home offices. The ample surface area gives you room to use your computer, do your paperwork and display family photos. Featuring a clear tempered glass surface, a space-saving, black sliding keyboard tray, and crisscross cherry finished legs this computer office desk would be an asset in any environment. Sturdiness and durability are essential elements of any piece of furniture and this glass computer desk is more than just a pretty face. The 5mm tempered glass top surface combined with the mix of steel and wood construction gives this rectangular desk a robust design that will hold up to 110 lbs. static weight capacity to accommodate your work setup. A powder coated finish protects the frame from scratches and floor glides protect your floor by sliding smoothly when you need to move the desk. This mixed media computer desk offers a practical option when you don't have a lot of space in your dorm room, home office or for a designated study area. Spills clean up quickly with a water based cleaner.
Glass, Laminate, Plywood, Steel
Imported
Breathe new life into your work area whether it's your dorm room or home office in your guest bedroom with this glass computer workstation. The crisscross frame combined with the clear glass top will add a sleek, stylish appearance to any environment.
Space-saving design with strong, 5mm thick clear tempered glass top, holds up to 110 pounds static weight capacity
Cherry finished plywood crisscross legs with floor glides, powder coated brace frame finish
Black sliding keyboard tray: 23.5"W x 11.75"D x 3.5"H from top; 25.75"H from floor
PRODUCT MEASUREMENTS: Overall Size: 39.25"W x 23.5"D x 29"H
Bought this on Prime Day and I'm glad I did. It took two-hours to put it together, but I was drunk and stoned, haha! I'm sure a sober person could put it together faster. The directions were really basic which caused me to have to think extra hard. Once it was together, though, it looked nice.Oh! I was unable to screw the screws into the glass top to secure it with the screws they sent. I tried others but needed washers. The glass is just sitting in top for now. I'll probably secure it with gorilla glue or something.Overall I give it 5 stars because I love the desk. I just think it could have better directions and a different way to secure the top.Cheers!Hard to assemble but otherwise I like it.I bought this desk after seeing it in a neighbor’s apartment. It is perfect for my needs. She warned me that it was a bear to assemble. So I am entering this with my eyes wide open. Out of the box, the first task is to attach the keyboard glides to the keyboard arm. Sounds easy enough. Four screws. However, the screws do not appear to fit the holes. I checked other reviews and saw this was a common problem. I encountered one suggestion; i.e., to ream the holes prior to insertion. (Note: the holes in the glide and the arm DO line up. Just make sure you are using the correct holes.) I found that spraying the holes with a bit of WD-40 makes the job “easy-easy.” No need to ream. Just a big of pressure on the screw in easily goes it. Now, on to the rest of the assembly.I really like my new desk! It was worth the buy. It holds my laptop and two monitors without feeling smushed together.Looks great and good qualityGood stand overall. I have a laptop and 2 big monitors on it, and they fit easily. Directions are a picture, and it can take a little time to figure out the correct hole for each piece. Had to change the pieces around a couple of times. I've seen worse.The one negative issue I have is the limited travel for the keyboard tray. It only extends 5" beyond the glass top. My other keyboard next to it has a tray that extends 11.5". So, it's a big difference between the 2. If you need to hunt for a top row key, it makes it difficult to reach and see.My keyboard also has the ability to raise up in the front for an angled keyboard. But I can't use that because the support bar for the glass top extends too low and blocks the tray travel out. The limited travel and limited tray height are my issues with the stand.This small (but not too small) desk is perfect for working from home. It fits two wide monitors and my laptop, so I can navigate across 3 screens while using the pull out keyboard which is at a perfect height for me.After 2 years, the desk still looks sharp in my downstairs office and has been easy to clean and maintain. The ONLY issue I've had is that the pull out shelf for the keyboard does get a little stiff and does not want to pull all the way out.I've had two of these desks for two years now. They were both easy to assemble but over time the keyboard slider broke off and will no long slide. Overall very good for the price though.All comments made about this desk are true. The style the shape the screws !!! Style nice shape nice screws - rubbish. We had to re position the screws because literally there were no screw fittings. If it had not been the fact that I needed the desk believe me it would have gone back. It is misrepresentation at its best. Shame on the suppliers for selling goods they know is substandard.Desk is well padded for delivery. Especially the glass top. All components individually marked so that there's no confusion during assembly. Loses a star because one of the components did not have screw threads machined. I had to tap these myself. Anyway desk looks good and fit for purpose.It look better than it is. The screws do not go as far as they should, really they have not paid attention to the detail on this product.It is not bad but I expected a little more care on the design.Difficult to assemble, even with the assistance of a DIY expert. Four screws also did not fit in their holes! The screws that did not fit were two for the glass top, and two for the cross beams at the back.Screws missing . Holes with no threads .